The façade system BTB/Blick Expert allows the fixing of thin GRC panels (from 10 mm) to structural elements of a building with rails and undercut BSA anchors. The system may be used both inside and outside buildings. The standard dimensions of façade concrete panels of the BTB/Blick Expert system are 1200 x 1600 mm, 2400 x 1200 mm with a thickness 10 mm to 30 mm. Other dimensions are available to order. (PDF) Panels are installed with anchors of the BLICK system.

Schematic drawings of fixing of panels with the Blick system
Blick anchors

Owing to low weight, our panels of architectural concrete with a thickness of 7 to 18 mm may also be fixed with elastic adhesive, e.g. KERAKOLL Superflex Eco


Owing to the dimensional deviations allowed by standards, it is recommended to provide joints between panels. Adhesive shall be applied both to the whole panel surface and the wall using a serrated trowel in a crosswise manner (to the right on the wall and to the left on the panel). In course of work, take care not to stain the outer surface of the concrete panel. Bonding operation may be carried out in temperatures above 0?C, as specified on packaging of adhesive. Outdoor assembly work should not be performed in the rain. Fixed panels should be protected against direct exposure to rain for the adhesive setting time, i.e. at least 24 hours. After complete setting of adhesive and thorough removal of possible stains, panels should be waterproofed all over their surface.